Quality product from Thunder Tiger Corp.
1:22.5 Scale Electric YACHT - KIT (Assembly Required)
From a famous round the world, single-handed and without stopovers sailing race, the Challenger 800 features latest yacht design with people-oriented quick-remove magnetic cabin & dual rudder control.
The Challenger 800 turns heads even while resting on display stand. Experience the unique sailing thrill with Challenger 800. Ride the wind and cleave the waves!
This is a kit version, you will need to assemble the yacht. It comes with a good display stand that you can proudly showcase her in your living room, office or lobby of any building.
Please scroll for images.
Length(mm / in.) 32.1" (817mm)
Beam(mm / in.) 10.43" (265mm)
Mast Height(mm / in.) 46.53" (1182mm)
Sail Area(sq. dm / sq.in.) 620sq.in. (40dm sq)
Overall Height(mm / in.) 60.71" (1542mm)
Overall Weight(g / oz.) 3.08Kg (6.79lb.
- ABS Blow Molded Mono Hull with Dual Rudder Design.
- Quick-Remove Magnetic Cabin.
- "Tear Resist Racing Sails with Adjustable Rigging.
- Rigid Extruded Al Booms & Mast.
- Low Drag Hydrodynamic Steel Ballast.
- Plywood Display Stand Included.
Download Instruction Manual (6.7MB)
Recommended Items Needed For Completion (Sold separately):
1. [Ranger II N] 2-Channel Radio Control System with Receiver or [RC4GS-R4FG] 4-Channel 2.4G RC4GS Radio System with R4FG Gyro Receiver
2. [HS785HB] Winch Sail servo x 1pc
3. [GP15AU-2U4] AA batteries (need 8pcs for transmitter and 4pcs for Receiver); or equivalent
- Tools Required for Assembly: cutter, plier, phillips screwdriver, hobby knife, scissors, CA instant glue, epoxy, drill bit, etc are not included.
The following items are NOT required if you are using AA Batteries for the receiver. Please note the 4xAA Battery Pack cannot fit into the boat battery compartment, only LiPo Battery of size not more than 91x45x23mm can fit
4. [LPB2S20C1300] LPB 7.4V 1300mAh LiPo Battery, 2S, 20C, 2 cell, T Plug, 74x34x16mm, 86gm
5. [HW-UBEC-3A-6S] Hobbywing 3A UBEC Output 5V or 6V Switch Mode BEC
6. [HOTRC-B3-20W] HOTRC B3 20W FAST CHARGING LiPo AC Balance Charger for 2s / 3s / 7.4V / 11.1V LiPo Battery
7. [NTP01-NS-DR] Non-Slipping T Plug (1 Pair), Male & Female, Dark Red *soldering required
Please scroll for pictures.